Industrial Rotameter

Acrylic Body Low Flow Rotameter in best and cheap prices with installation guide. Know the features, application, technical specifications. Also the only non-intrusive flow meter to measure gas at low pressures. Variable area flow meters (rotameters) are intended for general in line metering applications.
 

Ranges :

• 0.1-1 Up to 1-30 m3/Hr for Water
• 0.06-0.3 Up to 300-600 m3/Hr for Air (Alternate Unit LPS / LPM / LPH available on request)

Operating Principal: The essential part is a tapered float with an imbedded magnet. When flow occurs, the position of the float responds to flow driving a follower magnet outside the meter body, with no physical contact. The meter works well with liquids even at elevated pressures and tempratures. Since there is only one moving part within the flow stream, no maintenance is required.

Applications: This meter Used in all process industries due to its ease of installation, perfect safety and easy maintenance. It may be used for monitoring flow of de-mineralized water, raw water, acids, salts, organic solvent and most petroleum products.
 

FSD Series:

• Dial Type Read Out
• Straight Flow Design
• No Bends
• No Seals, No Threaded Joints
• Direct Reading Scale
• Compact, Economical Design
• Perfect Safety

C / C Distance :

• 0.1-1 Up to 6-60 M3/HR Range : 350 mm
• 8-80 Up to 20-200 M3/HR Range : 500 mm

Optional Available Features :

• Snap Action Micro Switch (1 NO / 1 NC)
• Switch Rating - 5 Amp, 230 V AC
• Switch Setting  - Adjustable over full range

Application :

• In Process Chemical Industries
• Pharmaceutical
• Dairy & Food Industry
• Petrochemical
• Fertilizer
• Effluent Water Treatment Plants & many applications where accurate flow measurement required in process & engineering industries.

• 1-5 Up to 5000-10000 ltr/Min for Air
• 1-5 UP to 200-500 ltr/Min for Water (Alternate Unit LPS / LPH / m3/Hr available on request)